It means “Frequently Asked Questions.” Now that that is out of the way….

This 12" x 12" x 18" EZBLOCK is constructed from 100% steel and guarantees a weight of over 500 lbs. Its design includes 12-inch bolt patterns conveniently located on both the top and bottom surfaces.

This 12" x 12" x 12" EZBLOCK CUBE is constructed from 100% steel and guarantees a weight of over 350 lbs. Its design includes 12-inch bolt patterns conveniently located on both the top and bottom surfaces.

The EZ BLOCK is designed to receive a SCREWJACK for leveling. Slide the screwjack right in the hole!

You can also use shims if needed.

Handle with caution—it's heavy! (That's by design.)

You can move it using one of these three methods:

A rated dolly.

A "HUG" attachment with a forklift.

If possible, slide a pipe all the way through the object. Once it's on its side with the pipe centered, your team can use the pipe to leverage and heave it into position.

The EZ BLOCK system is flexible, working perfectly on its own or together with its mates. When you need more weight or a larger structure, simply "HUG" two or more EZ BLOCKS together! This special connection is a steel plate that bolts quickly onto the top of the blocks, transforming them into a single, strong unit with the combined weight you need.

(And yes, everyone needs a hug!)

Forget those ugly concrete weights! Our steel EZBLOCK connects through the tent pole—not off to the side—for superior stability and a smaller footprint.

The pole locks securely into the ETC (EZBLOCK Tent Connector) with Grade 8 hardware. Secure, sleek, and takes up minimal space.

You can rent the complete EZ BLOCK system today—it's only a truck ride away from your site.

Email adam@yupgear.com for more information.

You can rent or buy the EZ BLOCK, the EZ BLOCK CUBE, and all accompanying accessories!

For more information on the benefits of ownership and purchasing, please contact us at adam@yupgear.com.

YES! Of course you can add screwjacks to the EZ BLOCK event ballast system. They slide right in and you don’t ever have to worry if it will get jammed up on the concrete inside of the block, because we do NOT use concrete!

YUP! The bottom is the SAME as the top. That said, the top is the same as the bottom. Get it? Its EZ! This is the EZ BLOCK!

YUP! Patent Pending! Pretty exciting stuff !

The bolt pattern on the top and the bottom of the EZ BLOCK is made for standard 12” x 12” box truss. You can bolt truss above and below the ballast. Typically you can bolt a base plate to the bottom.

No. and….YES! By itself it will NOT bolt directly to 20.5” box truss. When you add a “HUG” to the unit (starting with the 2ft x 2ft hug, you can bolt on a 20.5” stick of truss. Check out the Accessories page for more information.

If tipping the truss helps achieve the desired connection, then do it. The weight distribution won't be an issue.

Have you ever struggled for a solution? Well so have we. This is our solution.

The cool thing about the EZBLOCK is that you CAN move it WITHOUT a FORKLIFT. Each EZ BLOCK is manageable to move around with a rated dolly (you can get these at Home Depot). If you bolt multiple units together with an EZ HUG, then it is suggested you use a forklift.